Description
TheHappymodel Mobula 6 HDZero 1S Whoopisthe very first 65mm HD brushless whoop in the world. weighing less than 23.5 grams! The Mobula6 is a smooth and agile brushless drone that comes with the HDZero Nano Lite Camera. EX0802 KV19000 Motors. and many other cool features and specs that make this whoop a must-have! Happymodel has teamed up with HDZero. Runcam. Nick Burns. Mr. Shutterbug. Ryan Quellet. and many other enthusiasts to here to make the dream come true! This whoop comes with Built-In ELRSV3!
Note: Batteries are not included.
UART ELRS V3.0 ready
Battery Plug: GNB A30
Onboard black box ready
Default factory dump file:
dump file for Mobula6 HDZERO 1S 65mm digital HD brushless whoop V3
Specifications
Flight controller SuperX HD ELRS
- Betaflight 4.4.2 firmware ready
- Firmware target: CRAZYBEEF4DX
- MCU:STM32F411CEU6 (100MHz. 512K FLASH)
- Sensor: BMI270 or ICM42688P (SPI connection)
- Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V). only support 1s input for this drone
- Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read
- Built-in UART elrs receiver . elrs v3.0 ready. support WIFI and pass-through firmware update
- Bluejay ESC Firmware ready
- Built-in 5V 1A BEC
- Built-in voltage detection
- No betaflight analog osd chip
Onboard 4in1 ESC
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support ESC-Configurator and BLHELI_S Suite configurator
- Factory firmware: Z-H-30 ?C Bluejay. 0.19. 48kHz
- Default protocol: DSHOT300
Onboard UART ExpressLRS 2.4GHz Receiver
- RF Frequency: 2.4GHz
- Antenna: enameled copper wire 31mm length
- Telemetry output Power: <12dBm
- Receiver protocol: CRSF
- Default firmware version: ExpressLRS V3.0.1
- The same hardware with Happymodel EP1 receiver
- Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through
Motor
- Mode: EX0802 19000KV
- Configu-ration:9N12P
- Stator Diamter:8mm
- Stator Length:2mm
- Shaft Diameter:??1mm
- Motor Dimension(Dia.xLen):??10.5mmx14.9mm
- Weight(g):1.7g
- No.of Cells(Lipo):1S only
Propeller Gemfan 1219 Bi-blades
- Weight:0.19g
- Material: PC
- Pitch:1 inchProps Dia:30mm
- Center Hole Dia:1mm
HDZero Nano Lite Camera
- 14x16x11 mm
- 1.5gram
- 0.5 inch. up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
- Excellent low light performance
- Fov:
- 4:3: D:130?? H:108?? v:84??
- 16:9:D:122?? H:108?? V:65??
HDZero Whoop Lite VTX
- 1S Input
- 25mW/200mW RF Output-SmartAudio Support
- 25.5??25.5 M2 Soft Mounting- Antenna Retention
- Removable Shielding Box- 32.5??32.5mm(29x29mm inner)
- 4.5grams/4mm Thickness (without shielding)
Links
Includes
- 1x Happymodel Mobula6 HDZero 1S Whoop
- 1x Gemfan 1210 31mm Propeller (Set of 4)
- 1x Propeller disassemble tool
- 1x Spare Canopy
- 1x Screwdriver
There are no reviews yet.